[学科发展]机构学中机构重构的理论难点与研究进展——变胞机构演变内涵、分岔机理、设计综合及其应用

生产力发展与工程技术革新要求机构具备可自重组与可重构及“一机多用”的功能，以满足复杂工况需求。可重构机构具有可变活动度和可变构态，可以满足多任务、多工况与多功能的要求，然而，决定其设计方法的演变内涵与分岔机理的研究目前仍不为学者们充分了解。从变胞机构的演变与分岔机理的角度，以旋量理论、李群与李代数及微分流形为主要工具，揭示了机构演变内涵及运动与约束空间的内在关联关系；探究了机构演变中的分岔机理与可控奇异位形，回顾了变胞机构与折纸及折展机构的历史渊源，综述了变胞机构的构型设计、性能综合与新型设计理念及其创新应用。     

重新找回人工智能的可解释性

针对深度神经网络AI研究的可解释性瓶颈，指出刚性逻辑（数理形式逻辑）和二值神经元等价，二值神经网络可转换成逻辑表达式，有强可解释性。深度神经网络一味增加中间层数来拟合大数据，没有适时通过抽象把最小粒度的数据（原子）变成粒度较大的知识（分子），再把较小粒度的知识变成较大粒度的知识，把原有的强可解释性淹没在中间层次的汪洋大海中。要支持多粒度的知识处理，需把刚性逻辑扩张为柔性命题逻辑（命题级数理辩证逻辑），把二值神经元扩张为柔性神经元，才能保持强可解释性。本文详细介绍了从刚性逻辑到柔性逻辑的扩张过程和成果，最后介绍了它们在AI研究中的应用，这是重新找回AI研究强可解释性的最佳途径。     

Quantitative structure-properties relationship,molecular dynamic simulations and designs of some novel lubricant additives

Quantitative structure-properties relationship (QSPR) method was used to design some novel antioxidant lubricant additives, while molecular dynamics simulations were used to calculate their dynamic binding energies on steel and to hydrogen-containing DLC (a-C: H) crystal surfaces. 29 synthesized antioxidant lubricant additives were collected from literature and geometrically optimized by Spartan’14 version 1.1.2 software while Genetic Function Algorithm (GFA) method of the material studio version 8.0 software was used to build the predictive QSPR model. Four novel antioxidant lubricant additives were successfully designed out of which E)-3-(4-((3-amino-4-methylphenyl)diazenyl)-5-hydroxy-4H-pyrazol-3-yl)-2-argio-6,7-difluoroquinazolin-4(3H)-one with excellent property of 3.531295 (KOH/g) was found to be better than the one reported by other researchers. The dynamic binding energy results revealed that one of the designed additives was excellently bound to steel (?1120.11 kcal/mol) and to hydrogen-containing DLC (a-C: H) crystals surface (7814.156 kcal/mol) surfaces than its co-additives. This investigation shows that the entire studied antioxidant lubricant additive was found to be better bound to the steel surface than hydrogen-containing DLC (a-C: H) crystals surface. This study will help in synthesizing novel anti-oxidant lubricant additives with better additive properties that will slow the tendency of oil to oxidize and will not possess a threat to the environment as the structures do not contain zinc and phosphorus that could limit the operation of the catalytic converter in the exhaust pipe.     

Microstructure evolution during thermomechanical processing in 3Mn-0.1C medium-Mn steel

ABSTRACT

Medium-Mn steels are energetically investigated as a candidate of the third generation advanced high strength steels (AHSSs). However, their phase transformation and microstructaure evolution during various heat treatments and thermomechanical processing are still unclear. The present study first confirmed the kinetics of static phase transformation behaviour in a 3Mn-0.1C medium-Mn steel. Hot compression tests were also carried out to investigate the influence of high-temperature deformation of austenite on subsequent microstructure evolution. It was found that static ferrite transformation was quite slow in this steel, but ferrite transformation was greatly accelerated by the hot deformation in austenite and ferrite two-phase regions. Characteristic dual-phase microstructures composed of martensite and fine-grained ferrite were obtained, which exhibited superior mechanical properties.

This paper is part of a Thematic Issue on Medium Manganese Steels.     

基于协同优化算法的流速仪检定系统设计

提出了一种小型轻便的流速仪检定系统的设计方案,并运用改进的多学科协同优化方法求解各学科设计变量的最优解。首先介绍了算法思想及改进措施,并根据系统设计要求建立了各学科的设计变量、目标函数和约束条件；其次,运用遗传算法求解各学科设计变量的最优解,并根据优化结果完善了系统的设计方案,同时运用计算机仿真等方法验证了优化结果的可行性。结果表明,优化后的检定系统满足流体力学效应、匀速运动时间、系统重量等设计要求,同时证明了协同优化算法解决多学科设计优化问题的有效性。     

Mechanical and thermal properties and microstructural evolution of Ta-doped Nb4AlC3

(Nb_1-xTa_x)₄AlC₃ (x = 0–0.5) ceramics were prepared by the hot press sintering method. The XRD results show that the second phase (Nb_1-xTa_x)C is formed when the Ta content increases to 25 mol%. The SEM micrographs show that (Nb_1-xTa_x)C has a core/rim structure, whose formation mechanism was also investigated. Substituting some Ta for Nb can significantly improve the mechanical properties of Nb₄AlC₃. (Nb_0.75Ta_0.25)₄AlC₃ exhibits an excellent fracture toughness of 8.3 ± 0.3 MPa m^1/2 at room temperature (RT). The highest Young's modulus (349 ± 16 GPa) and Vickers hardness (4.5 ± 0.3 GPa) at RT are exhibited by the (Nb_0.5Ta_0.5)₄AlC₃ sample, which correlate to increases of 18% and 80%, respectively, compared with those of Nb₄AlC₃. The flexural strengths of (Nb_0.5Ta_0.5)₄AlC₃ are 439 ± 18 MPa at RT and 344 ± 22 MPa at 1100 °C, which correlate to increases of 27% and 45%, respectively, compared with those of Nb₄AlC₃. The solid solution of Ta and the formation of (Nb_1-xTa_x)C are beneficial to the strengthening of Nb₄AlC₃. The coefficient of thermal expansion (CTE) increases slightly from 7.08 × 10⁻⁶ K⁻¹ for Nb₄AlC₃ to 7.24 × 10⁻⁶ K⁻¹ for (Nb_0.75Ta_0.25)₄AlC₃ at 25–1400 °C. The thermal conductivity of (Nb_0.75Ta_0.25)₄AlC₃ (28.4–29.8 W/m·K) is higher than that of Nb₄AlC₃ (18.1–21.2 W/m·K) over the whole test range (25–1000 °C). Owing to their excellent mechanical and thermal properties, Ta-doped Nb₄AlC₃ ceramics have good potential as structural materials.     

Microstructure and Mechanical Properties of Mg–RE–TM Cast Alloys Containing Long Period Stacking Ordered Phases: A Review

Casting magnesium alloys hold the greatest share of magnesium application products due to their short processing period, low cost and near net shape forming. Compared with conventional commercial magnesium alloys or other Mg–RE-based alloys, the novel Mg–RE–TM cast alloys with long period stacking ordered(LPSO) phases usually possess a higher strength and are promising candidates for aluminum alloy applications. Up to now, two ways: alloying design and casting process control(including subsequent heat treatments), have been predominantly employed to further improve the mechanical properties of these alloys. Alloying with other elements or ceramic particles could alter the solidifi cation pattern of alloys, change the morphology of LPSO phases and refi ne the microstructures. Diff erent casting techniques(conventional casting, rapidly solidifi cation, directional solidifi cation, etc.) introduce various microstructure characteristics, such as dendritic structure, nanocrystalline, metastable phase, anisotropy. Further heat treatments could activate the transformation of various LPSO structures and precipitation of diverse precipitates. All these evolutions exert great impacts on the mechanical properties of the LPSO-containing alloys. However, the underlying mechanisms still remain a subject of debate. Therefore, this review mainly provides the state of the art of the casting magnesium alloys research and the accompanying challenges and summarizes some topics that merit future investigation for developing high-performance Mg–RE–TM cast alloys.     

LaMgAl11O19 synthesis using non-hydrolytic sol-gel methods

Polycrystalline LaMgAl₁₁O₁₉ (LMA) was prepared by four different non-hydrolytic sol-gel methods. From stable solutions, four powder precursors containing an amorphous and nanocrystalline phase with specific reactivity were obtained. The particle size, morphology, thermal behaviour, and phase composition of the powder precursors were studied using DLS, TEM, DSC/TG and XRD. Bulk ceramic samples containing LMA were prepared at 1200?°C for 16?h and examined in terms of phase purity and microstructure using XRD, SEM, and TEM. Raman spectroscopy of pure LMA was used to study the structure in detail. A mechanism of LMA formation and a relation between powder precursor properties and final phase composition is proposed. These findings may be useful for designing modern technologies for fabrication of LMA for optical or protective coating applications.